Camp Pegs are an innovative new screw
in peg for securing tents, annexes, awnings, shades, shelters and tents.
They have been tested in various ground types and easily outperform most
other types of peg.
Camp Pegs come in three lengths, small at 160mm long, regular at 200mm
and large at 260mm. As they have a large 25mm diameter washer head they
can be used as is or with an optional hook allowing the tension springs
and guy ropes to be easily attached.
All pegs are case hardened solid steel and DELTAŽ-SEALED
to resist corrosion, a zinc flake coating system. The system comprises
an electroplated base layer and DELTAŽ-SEAL topcoat which provides
highly effective anti-corrosion protection, over twice as effective as
The hooks are zinc plated steel. The
and painted safety yellow to minimise the hazard of tripping over guy
Camp Pegs are designed to be screwed into the ground using a T50 bit
that fits all cordless drills. They are also unscrewed from the ground
so there is no need to use peg pullers. The pegs can be screwed in and
out using a 8mm wide screwdriver.
For extremely hard ground a 6mm masonry drill can be useful as a pilot
to get the screw started.
For more information please visit
information provided by John of Camp
article by Rob