Hi!
We just got our trailer registered again, but it was mentioned that our compliance plate is not there. Last year nobody noticed this; and it was the first year we had to get rego check done (trailer was built in 2013).
We could not find it anywhere on the trailer. The VIN is stamped into the draw-bar though.
I don't ever remember seeing one, and there are no holes or marks where a plate might previously have been.We bought the trailer 2nd hand about 4 years ago.
It is NSW rego.
Is this a must-have, or is VIN stamp sufficient?
VIN Number and compliance plate
Moderators: krp102, Coxy68, robcaz
VIN Number and compliance plate
Rick & Cherrie & Zoe Dog! Anywhere the trailer is set-up is our Happy Place!
Smith 2013 Off-Road soft-floor CT
Smith 2013 Off-Road soft-floor CT
Re: VIN Number and compliance plate
Hi Rick,
If the trailer was manufactured before 1989 & has remained in registration, it only requires the chassis number to be stamped as yours does. http://www.boldtcrc.com.au/6-tips-when- ... ed-in-nsw/
If the trailer was manufactured before 1989 & has remained in registration, it only requires the chassis number to be stamped as yours does. http://www.boldtcrc.com.au/6-tips-when- ... ed-in-nsw/
happy camping
Rob & Carol
Australian CamperTrailers Group co-owner
We're just two lost souls swimming in a fish bowl, year after year
Rob & Carol
Australian CamperTrailers Group co-owner
We're just two lost souls swimming in a fish bowl, year after year
Re: VIN Number and compliance plate
Update: It was there all along!
When I mentioned about the compliance plate to my brother, he took a look...
...and found it about 3 seconds later! It was concealed underneath the number plate. Simply removing one tech screw and swinging the plate down revealed all!
He is going to remove it and remount it on the draw-bar near where the VIN is stamped.
When I mentioned about the compliance plate to my brother, he took a look...
...and found it about 3 seconds later! It was concealed underneath the number plate. Simply removing one tech screw and swinging the plate down revealed all!
He is going to remove it and remount it on the draw-bar near where the VIN is stamped.
Rick & Cherrie & Zoe Dog! Anywhere the trailer is set-up is our Happy Place!
Smith 2013 Off-Road soft-floor CT
Smith 2013 Off-Road soft-floor CT