camper trailers tech tips

Dave's Light Pole






Dave's Light Holding Pole


    Only too often you can never find a suitable place for your portable 12 volt camping light. Heres a handy way to set up your light on a stand which will not blow over in the wind.

    Dave welded a bracket to a piece of tube, then bolted it to the trailer. He then cut about 18"/450mm off a tent pole & put a brass elbow on the end joining the 18 inches to the elbow.

    The pole can adjust up as high and anywhere you need light over table. 




          Thanks to Dave King for sharing this idea  



 november 2007